Materials you need: 1. Storage plastic box my is 14" long x 9" tall. 2. Hand tool to drill my is my handy DREMEL best you can buy. 3. Wood glue. 4. Wood toy wheels 1/4" hole. 5. Tape measure. 6. Sharpie marker. 7. Knife. 8. Saw Tool. 9. Wood dowels. 10. And of course RIBBONS............
Cut the dowel ends with a knife only if is to big for the toy wheel.
Measure the dowel in the box and cut 4 pieces.
Glue the toy wheels in each of the dowels ends ( just one end in each dowel).
Measure where you want the holes and use the sharpie marker.............
Drill the holes in the short side 4 holes per side.......................
Drill the holes in the long side of the box ( in my I did 2 lines of 28 holes.
Stock the Ribbons in each of the dowels...............
When finish stocking the Ribbons put the toy wheel in the end of the dowel twisted, do not glue it ( so when one of the Ribbons finish you can stock in a new one)............
F I N I S H ! ! ! 
" GOOD LUCK "